Description

QWIK-SCRUBâ„¢ is a heavy-duty, water-based cleaning concentrate designed for scrub / re-coat maintenance procedures. It is ideal for use in automatic scrubbers equipped with proper floor pad or brush. Using a mild pH range formulation, QWIK-SCRUBâ„¢ aggressively removes embedded soils and scuffs in upper layers of finish film, and prepares the surface for re-coating with a minimum of rinsing, saving time and labor.

DIRECTIONS: DILUTE PRODUCT AS FOLLOWS:
Moderate soil /build-up, Light finish removal: Dilute 5 oz. (1:25) of QWIK-SCRUBâ„¢ per gallon of warm water

Heavy soil /build-up, Heavy finish removal: Dilute 10 oz. (1:12) of QWIK-SCRUBâ„¢ per gallon of warm water

SCRUB/RE-COAT USING STANDARD 175 RPM FLOOR MACHINE: Dilute QWIK-SCRUBâ„¢ in mop bucket according to above dilution directions. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes (depending on how deeply it is desired to scrub). With machine and scrub floor pad or brush, scrub surface of floor until all embedded soils and scuffs are removed from finish. After scrubbing, remove solution from floor with wet-dry vacuum or a clean mop. Damp mop rinse with clear water to remove any excess residue. Allow floor to completely dry prior to re-coating.
SCRUB/RE-COAT USING AUTOMATIC SCRUBBER: Dilute QWIK-SCRUBâ„¢ in mop bucket according to above dilution directions. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes (depending on how deeply it is desired to scrub). Fill autoscrubber with clear water, mount scrubbing pad or medium grade brush. With vacuum off and squeegee up, scrub the floor until all embedded soils and scuffs are removed from finish. Lower squeegee and vacuum all scrubbing solution. Using clear water from the autoscrubber, rinse floor to remove any excess residue. Allow floor to completely dry prior to re-coating.