5X Powder 25lb (Cleaning and Polishing for Marble).

Use on any marble other than green marble as a final polishing step or to re-polish areas affected by etching or mild abrasion. Can be used on floors, counter tops or walls.

For decades marble factories have used 5x bricks to achieve the high reflectivity finish that is seen on polished marble titles and slabs. This Powder is used as a final step in achieving that super high finish. Used with water and a Gorilla Pad one can get excellent results.

1. Cover baseboards, carpet, etc. with protective plastic and/or protective tape.
2. Strip any topical finishes completely using VMC Pro Strip.
3. Clean grout with VMC Pro Klenz if needed.
4. Wet floor lightly.
5. Sprinkle 2 oz. of 5x onto tile surface in a circle.
6. Set a natural hair pad (Gorilla Pad) onto the 5x Powder.
7. Break area into 25 sq. ft. sections.
8. Buff with a 175 RPM floor machine until a desired polish is achieved.
9. Squeegee slurry to adjacent area and repeat step 8 adding more water and 5x Powder as necessary.
10. Wet vacuum 5x slurry until most of the 5x Powder has been removed.
11. After polishing, using a NEW natural hair pad, neutralize and clean the floor by scrubbing with VMC 30 at 2oz. per gallon of water. Pick up cleaning solution with wet vacuum. Repeat if necessary.